Item #427

Info: Ikegami HL-DV7AW 169 Switchable to 43 Aspect Ratio

Asking Price: $800.00 Acceptable payment types: visa, mastercard, paypal, cheque, money order, money wire Category: Film Cameras > 35mm SLR > Other Date Posted: Nov 29, 2008 01:15:05 PM About Seller: Add to My Hotlist Username: sam99 London, ON Canada [other classified ads]

Days in System 643 Views: 325 Avg. Views/Day: 0.51

Description

Includes:

Hl-DV7AW 16:9/4:3 switchable Camera Head w/ DVCAM VCR (B4 Type)
MC-11 Microphone with Wind Screen
32MB Memory Card TC-5832 Smart Media
Fujinon A20X8.6BERM-SD 1:1.8/8.6-172mm with extender 20X lens
VF15-32 1.5” Viewfinder
VI-DV7W Video-In board for HL-DV7AW
Anton Bauer Titan Charger/Power Supply
T-791 Tripod Mounting Plate
Petro Camera Case PCUB-2 Soft Carrying Case f/Camcorder
Operation Manual
Fujinon CFH-1 Focus Controller & Cable
Fujinon SRD-92 Zoom Control
1 - Anton Bauer 60 watt hour ProPack Battery – Logic Series
Chrosziel Munchen Matt Box with rods


Manufacturers Information:

· Digital Process LSI - (ASIC) is adopted to produce high quality video including a six - axis linear matrix system for fine tuning of color to match broadcast requirements.

· Video In connector - Includes External Video Input. Pool feed or other video source can be recorded by the tape recorder section of this camera recorder. Allows user to Input an external video source for the purpose of recording it to the DV tape deck inside the camera.

· Low smear and high sensitivity CCD - High quality CCD are employed to reproduce good quality Pictures even under very low light condition.

· +48dB Hyper Gain for very low light conditions - Is provided so that good video reproduction is assured even in the harshest shooting conditions.

· Super V - To enhance Vertical resolution, the Super V function can be enabled, increasing Vertical Resolution by 20%, to achieve natural picture reproduction with remarkably fine resolution.

· High Resolution Viewfinder - A 1.5 inch viewfinder is employed, featuring over 600 horizontal lines resolution. Ease of operation is carefully considered, e.g. Brightness, Contrast and Peaking controls are easily accessible on the front of the viewfinder and a rear tally light is provided. The positioning of the viewfinder is easily adjustable.

· DVCAM FORMAT - High Picture Quality Digital Component Recording, the DVCAM format is a digital system with Luminance signal (Y) and Color Difference signals (R-Y, B-Y).

· PCM Digital Audio System - Two modes are selectable between 2ch (48kHz sampling frequency) and 4ch (32kHz sampling frequency) which may be useful for Audio After Recording (dubbing).

· Long Recording Hours - Standard size cassettes have a max. 184 minutes recording time, while mini-cassettes have max. 40 minutes recording time.

· Preset and Variable Shutters - The preset shutter has six speeds (1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 seconds) and variable speeds can be set between 1/60.3 and 1/787 seconds

· Diagonal Detail for higher picture quality - Function increases sharpness in the diagonal direction. This function also helps to reduce cross color moire in NTSC.

· Skin Detail for favorable reproduction - Is used when skin quality is being emphasized. The edge sharpness of the skin tone can be softened so that wrinkles or age lines become less visible on the TV screen. AHD, Auto Hue Detect, for easy setting of Skin tone detail is employed.

· Soft Detail Function - To ensure picture uniformity even with high contrast areas, Soft Detail is employed to produce images that are more natural, without excessive adge enhancement.

· Variable Detail Settings - 8 step variable frequency boost of the detail signal and B/W balance function which controls center luminance level of detail signal are provided to have better detail effects depending on the subject.

· Various GAMMA settings - 4 types of GAMMA characteristics selectable (OFF/0.35/0.4 /0.45), but a GAMMA curve pattern with x5 initial gain is also selectable for certain broadcast requirement.

· Black Press - To emphasize only the brighter areas of images. It is selectable in 3 steps (-7%, -5%, -3%). It can add contrast to a washed out picture.

· Black Stretch - Avoid excessive dark areas in high contrast scenes. With three settings (3, 5 and 7%), this function enables improvement in dark areas in the picture by lifting the image level of only low brightness areas.

· Shock-less Auto White Balance - To avoid a sudden change in white balance when switching between white balance memories, change over time is selectable. This function exhibits superb results when the scene changes from an indoor to outdoor shot or vice versa.

· Convenient filter linked White Balance - The camera has a total of 8 AWB memory presets, A/B channel for each filter. The AWB is linked to the filter and automatically changes the white balance when the filter changes. Also, when setting the AWB, the Zebra indicator appears to show the white area being used by the AWB system. If it doesn't work (NG - No Good), the viewfinder indicates if the color temp was too high or too low (H. TEMP or L. TEMP.)

· Data Files - To enhance versatility, lens data files and scene data files are provided. A lens file stores data for max. 8 lenses to compensate for differences in lens optical characteristics, such as shading or color balance, and lens extender condition. A scene file stores camera settings for up to 8 different shooting conditions.

· A low center of gravity camera design - A one-piece camera + recorder with excellent ergonomics and very good weight balance for the comfort of the operator.

· Specially designed Shoulder Pad - A newly and specially designed shoulder pad made of non-slip material makes camera work easier. The pad can be easily adjusted.

· Convenient P. FUNC switch - P. FUNC (Personal Function) switch is provided for the most frequently used functions for the operator's convenience, such as control of scene file recall, Soft Detail, and Black Press/Black Stretch.

· Rotary Encoders for easier Setup - On the lower side of the camera, 3 rotary encoders are provided for easier access to setup parameters. This allows camera settings and checkups even without a remote control panel.

· Camera Menu - Easy to navigate with a rotary encoder at the front of the camera. The menu can be customized for specific users by changing which control items are included.

· Instant recall to the Factory Preset condition - The "initialize" function is provided to go back to the factory's original settings.

· Return Video - In a multiple camera operation, return signals can be observed by simply using the RET button on the lens control. This is achieved by connecting RET video to genlock input and selecting as return source (menu).

· Memory Card provision - A Smartmedia card slot is provvided in order to keep various camera setting parameters in a small memory card. Full camera set up, as well as scene file sets can be stored to and loaded from the card.

· Various tally lights, even from the rear - In the VF, tally lights appear both above and below the picture. Rear tally lights on the VF and handle are also provided.

· Slot for a built-in wireless receiver - A space for a wireless receiver is provided at the rear of the camera. This Ikegami standard Unislot for a radio microphone receiver avoids extra wiring and possible damage.

· Battery bracket with extra connector for lighting - An Anton Bauer type battery bracket is provided. The bracket has an extra lighting connection



please email me at jacklewis706@googlemail.com

Images